Length of stroke:
Strokes per minute:

Chuck Capacity:
Minimum (adaptor not required):
Maximum:

Extended tool working surface:

Table tilt (in 4 directions):
Table area:
Throat depth:
Motor:



Dimensions:
Base plate:
Overall length:
Overall width:
Height (table model):
Maximum height:

Shipping weights with motor:

1-1/2 inches
350 to 450 SPM


1/8" diameter
1/2" x 1/2"

3/8" x 1-5/8" clearance chuck hole
up to 8 degrees
10" x 10"
7-1/4"
1/3 H.P 1800 RPM 115 Volt Single phase 60Hz, 3-wire cord/plug/switch


7" x 18"
18-3/4"
10-3/4"
11"
24-3/4"

Model F256B - 84lbs

The Keller Diefiler and sawing machine is primarily used in the extrusion and die-making industry.  It's used as a maintenance support machine when repairing extrusion dies and maintaining other metal working punches and dies.

As a drill grinder is to a drill index...so the Diefiler is to a punch and die set.

This tool is a must for every die shop, tool room, and maintenance department.  Changing from sawing to filing to lapping quickly and easily, the Keller Diefiler eliminates most of the little jobs formerly done by hand.

The Diefiler's outstanding, all-around performance saves many worker hours each day.